VISIT OUR EBAY STORE
Kreg Drawer Slide Jig with Cabinet Hardware Jig and Concealed Hinge Jig
Brand New in Original Packaging
SKU: KHISLIDEPULLHINGE
Kit Includes:
Kreg Concealed Hinge Jig
Kreg Cabinet Hardware Jig
Kreg Drawer Slide Jig
Kreg Drawer Slide Jig
2 x Brackets
4 x Upper/Lower Sliders (Installed)
Owner’s Manual
Kreg Concealed Hinge Jig
Jig Base with Index Cams
Drill Guide
35mm Carbide-Tipped Drill Bit
Stop Collar with Hex Wrench
Owner’s Manual
Kreg Cabinet Hardware Jig
Jig Base
Edge Guide
2 x Drill Guides with Knurled Nuts
2 x Non-Slip Pads
2 x T-Knobs and Bolts
Owner’s Manual
Kreg Concealed Hinge Jig
The Kreg Concealed Hinge Jig takes the guesswork out of installing cabinet doors using concealed hinges by ensuring accurate hinge alignment, so you can install doors that fit great and work well. This economical, simple-to-use jig ensures accurate alignment of hinges, ensuring that you can install doors that fit great and work well. Plus, the Concealed Hinge Jig works with an ordinary drill and the included carbide tipped drill bit. This is a valuable piece to add to your collection of Kreg tools.
Easy to Use
The Concealed Hinge Jig allows you to drill cup holes for concealed cabinet door hinges (sometimes called Euro hinges or European hinges) using just a drill. The door hinge jig positions an included carbide-tipped bit exactly at the proper position and offset, and it drills to the ideal depth every time thanks to a depth stop collar. This Euro hinge jig is intuitive to use, and it ensures that you can mount cabinet doors that fit well and work properly.
Perfect for Mounting
Concealed hinges are great for mounting cabinet doors because they stay out of sight, they’re adjustable, and they work very well. Mounting them, though, requires drilling a large hole at a very specific position and depth. The Kreg Concealed Hinge Jig takes the guesswork out of drilling those holes and allows you to do it with nothing more than a drill and the carbide-tipped hinge drill bit that comes with the Kreg jig. An optional 1/16-inch bit is required to drill for hinge-mounting screws.
High-Quality Construction
The Kreg Hinge Jig consists of a glass-filled nylon base with a hole for inserting a drill guide. Indexing cams ensure that the jig positions the bit to drill a hole at the required offset – which is dictated by each hinge – and a built-in stop collar ensures that the cup depth is correct every time. There are even holes that you can use to guide a bit for hinge screw holes. The Concealed Hinge Jig comes with a high-quality, carbide tipped bit to ensure great results.
Reliable and Consistent
The Concealed Hinge Jig is designed to be easy for beginners to use but robust enough for professionals. Just pick out your hinges, look up a few basic mounting instructions that come with them, and then set up the hinge jig by adjusting a pair of built-in cams. After that, you’re set to drill hinge cup holes using any ordinary drill. Whether you’re installing one cabinet door or making doors for an entire kitchen, the Concealed Hinge Jig provides reliable, consistent results.
Built-in indexing tabs provide accurate hinge positioning
Repeatable results with built-in measuring scales
Bit guide and stop collar for reliable drilling
Easy to use with any drill and without special tools
Adjustable cams ensure proper hinge offset
Comes with durable carbide-tipped drill bit
Strong and lightweight materials for easy handling
Kreg Concealed Hinge Jig
Jig Base with Index Cams
Drill Guide
35mm Carbide-Tipped Drill Bit
Stop Collar with Hex Wrench
Owner’s Manual
Kreg Cabinet Hardware Jig
The Kreg Cabinet Hardware Jig takes the guesswork out of installing cabinet knobs and pulls. The movable edge guide and measuring scales make it easy to position knobs precisely, while adjustable drill guides ensure straight holes for perfect knob and pull positioning every time. This cabinet or cupboard door handle jig is perfect for new construction and for refreshing entire rooms.
Takes the Guesswork Out of the Process
Whether you’re updating your cabinets or building a project from scratch, adding hardware like knobs and pulls is often one of the final steps – and one of the most intimidating. Drill the holes incorrectly, and it can be very difficult to correct the mistake. This cabinet handle jig takes all the guesswork out of the process by allowing you to drill straight, accurately positioned holes every time, so you’ll know that every piece of hardware is positioned correctly and consistently. Updating or building cabinets with a Kreg jig is simple.
Smooth Positioning
The Cabinet Hardware Jig features movable, hardened-steel drill guides that lock in place to align with common hole-spacing measurements for cabinet knobs and pulls. This allows you to confidently drill straight, accurately positioned holes. A movable edge guide and built-in measuring scales (in imperial and metric) ensure that those holes will be positioned where you want it every time, which means you can drill as many holes as you need without the uncertainty and potential mistakes that can come with measuring and marking every one.
Easy to Use
The Kreg Hardware Jig is designed to be intuitive for beginners to use, but robust enough for professionals. All you need is a drill and a 3/16-inch bit (sold separately), and the ability to set the cabinet door handle jig to match your hardware and the position where you want it to go. Durable polymer construction makes the jig tough but light, and hardened-steel drill guides ensure that you’ll get straight, accurate holes – whether you’re drilling one, a few, or hundreds.
Adjustable guides for accurate hole placement
Built-in measuring scales for repeatable results
Versatile for mounting single and multi-hole knobs
Adjustable edge guide for easy positioning
Strong, lightweight materials for easy handling
Durable hardened-steel drill guides
Kreg Cabinet Hardware Jig
Jig Base
Edge Guide
2 x Drill Guides with Knurled Nuts
2 x Non-Slip pads
2 x T-Knobs and Bolts
Owner’s Manual
Kreg Drawer Slide Jig
The Kreg Drawer Slide Jig takes the guesswork out of installing drawer slides, enabling DIY drawer slide installation. This easy-to-use jig holds slides in position as you drill mounting holes in the cabinet, and it supports drawer boxes while mounting slides to the drawer. Plus, the Jig works with ball-bearing, epoxy-coated, and undermount slides for perfect positioning every time. The Drawer Slide Jig simplifies drawer installation by aligning slides in the cabinet and on the drawer. Built-in tabs make the jig easy to align to support the slide inside the cabinet, and to support the drawers as you attach the slides to them. This Kreg drawer slide mounting tool is simple to use, and it ensures that every drawer fits right and operates smoothly.
Takes the Guesswork Out of the Process
Whether you’re updating cabinets or you’re building a project from scratch, mounting drawers is always a challenge. The slides have to be level, straight, and positioned properly, or the drawers won’t operate well. The Drawer Slide Jig takes the guesswork out of mounting drawer slides by indexing with the cabinet frame (or side on frameless cabinets) for perfect alignment.
Smooth Positioning
The jig supports the drawer slide level and straight while you install it in the cabinet. Then, the jig clamps on so it protrudes from the cabinet to support the drawer while you drive screws into the drawer box. With this jig, you’ll know that your slides are positioned correctly, so your drawers will operate smoothly.
Incudes Two Brackets
The Drawer Slide Jig consists of two brackets that clamp in place inside the cabinet – one on each cabinet side – and align with the cabinet face frame (or with designated marks on frameless cabinets) to support the drawer slide as you drill mounting holes. The brackets are also reversible to protrude from the cabinet, and then clamp in place perfectly aligned to support the drawer as you mount the slides to the drawer box, too. This slide tool works with almost all types of drawer slides, including ball-bearing, epoxy-coated, and undermount slides.
Easy to Use
Like other Kreg tools, this DIY drawer slide jig is designed to be intuitive for beginners to use, but robust enough for professionals. All you need are the slides you’ll use, a clamp, and the Drawer Slide Jig, and you’re set to install drawer slides just like the pros. Whether you’re installing one drawer or dozens, the Drawer Slide Jig provides fast, consistent results.
Accurate slide positioning with built-in indexing tabs
Repeatable results without measuring and marking
Versatile for use in cabinets, cases, and more
Reversible to mount slides to cabinet and drawer box
Secure for holding slides in place as you work
Strong, lightweight materials for easy handling
Includes instructions for how to use Kreg Drawer Slide Jig
Kreg Drawer Slide Jig
2 x Brackets
4 x Upper/Lower Sliders (Installed)
Owner’s Manual
Shipping
Payment
Returns
Feedback
Shipping for this Auction is
FREE
in the Continental US Lower 48 states only. Shipping Fees include all Handling & Insurance.
Domestic Shipping to lower 48:
All Shipping Prices Include Shipping Handling and Insurance
.
Domestic Shipping to Alaska, Hawaii, Puerto Rico and US Territories:
The free shipping is for the lower 48 only.
Shipping to APO/FPO’s:
In order to get a quote please e-mail us with your APO/FPO zip code first. We will respond with the shipping cost. Please note there are some locations we will NOT be able to ship to.
The free shipping is for lower 48 only
International Shipping:
Paypal is our only accepted from of payment . Shipping charges only cover the cost of shipping and insurance. HotDigital is not responsible for any customs/duty/tax/brokerage fees that may be incurred. These are the sole responsibility of the buyer. As these fees are assessed by each country we are unable to quote a price for or control them. We can only ship to addresses which are Confirmed or Verified through PayPal. We cannot declare items at a lesser value or as “gifts.”
Hotels:
We
DO NOT
Ship to Hotels.
Express Shipping:
Express Shipping is for the lower 48 states only. There is no express shipping available for Alaska, Hawaii, Puerto Rico, U.S. Territories and International orders.
Paypal:
PayPal is our preferred method of payment for all of our eBay sales. For customer service please contact us through eBay Messages
Immediate payment via PayPal is required for all Buy It Now items. For all Best Offers, payment is required within 3 days. If you need special arrangements, please contact us through eBay messages. After your order has been shipped, you will receive an e-mail with the name of the carrier and the tracking number.
Returns are permitted if you are not satisfied with your purchase and must be initiated by the buyer within 30 days from delivery date.
For Domestic Purchases:
If you are not satisfied with your purchase, you may return it (see exceptions in Paragraph F below), within 30 days of receipt, for a refund or replacement – subject to the following:
a) Contact us through eBay messages or the returns link to receive a Returned Merchandise Authorization (RMA) number to ensure proper handling of the return and/or replacement.
b) In order to be eligible for a full refund, less shipping expenses, your returned merchandise must be in its original new condition, as shipped, with all packaging, manuals, and paperwork intact and unaltered. Items which have been opened are returnable, however they will carry a restocking fee.
c) Customers remain responsible for the shipping and handling expenses incurred in shipping the item to them. If an item is offered with “Free Shipping,” this means we are paying the freight on your behalf. If that product is returned for a refund, the shipping expenses incurred, will be deducted from the refund. If an item is refused, the carrier bills us for shipping both ways, and these expenses incurred on your behalf need to be deducted from your refund
d) All returns are subject to inspection. Products returned must be in brand new condition, as per Paragraph b), if not, it may be deemed non-refundable or will be subject to at least a 15% restocking fee. If your return is missing accessory components, or shows signs of wear – restocking fees will be higher. For specific restocking fees that may be applicable to your return, please contact us through eBay messages.
e) Returns should be packed in an outer shipping carton, not just the original box/packing of the product. The RMA# should be clearly inscribed on the shipping label. A copy of your invoice and Order # should be included, and your return should be insured, with shipping costs pre-paid. We cannot accept any COD shipments.
f) There are product categories which are not returnable due to hygienic or sanitary as required by manufacturers. If your items is a consumable good or is has been locked by a manufacturer such as Apple or HP the return will not be accepted
For Warranty information, merchandise lost / any other issues in transit, or order cancellations, please contact us through eBay Messages. In an event where there is an error regarding a price error or description, we will notify you ASAP. In this event there will be no obligation to proceed with the purchase. Any amount charged to the customer will be 100% refunded.
For International Purchases:
Returns will be accepted within 30 days of the receipt of the item. In order to be eligible for a refund your returned merchandise must be in its original unopened condition, as shipped, with all packaging, manuals, and paperwork intact and unaltered. Items removed from their ‘blister-pack’ display packaging are non-refundable.
International Buyers must pay return shipping via the same method originally shipped.